temperature reduction
英 [ˈtemprətʃə(r) rɪˈdʌkʃn]
美 [ˈtemprətʃər rɪˈdʌkʃn]
网络 温度还原
英英释义
noun
双语例句
- Combined with phase change coating and other functional coating, thermal infrared phase changed& temperature reduction composite stealthy coating was prepared, which reduced the difficulty of individual application the phase change materials to thermal infrared stealthy, and the performance of every coatings were tested.
将相变涂料与其他功能涂层结合，制备出热红外相变&降温复合隐身涂层，降低了单独将相变材料应用于热红外隐身的难度，并对各涂层的性能进行了测试。 - But RDI ( low temperature reduction degradation ( index)) of imported pellets and lump ores is higher than that of high basicity sinters.
但进口球团矿和进口块矿的低温还原粉化指数高于高碱度烧结矿； - The influence of different activities of lime on the grade, the content of sulphur, average granularity, the reduction performance and low temperature reduction pulverization performance of agglomerate has been studied.
研究了不同活性度的石灰对烧结矿品位、硫含量、平均粒度以及还原性能、低温还原粉化性能的影响。 - The results show as follows: ( 1) Water body contributes to the temperature reduction and humidity increase in its surrounding area.
归纳起来主要研究结果有下列几方面：（1）北京城市水体的小气候观测试验表明：水体对周边区域的降温、增湿有一定的贡献。 - According to the principle, this article examines relative process used in gas gathering station using initial pressure energy of natural gas for throttling temperature reduction and gives a calculation method of injection volume of methanol to inhibit formation of hydrate during throttling temperature reduction.
本文运用这一原理，研究利用天然气原始压力能，实现节流降温在集气站所采用的工艺流程，给出了在节流降温过程中，不形成水化物所需的甲醇注入量的计算方法。 - Research on the temperature reduction performance of green solar heat reflective coatings
绿色太阳热反射涂料降温性能研究 - This paper expounds the internal connection and regularity among sintering technological conditions, microscopic structures of sinter and degradation during low temperature reduction.
本文阐明了烧结工艺条件、烧结矿微观组织结构与烧结矿低温还原粉化的内在联系和规律。 - Ensure the temperature reduction fans on the rear of the ultrasonic cabinet as well as on the both ends of the transducer work properly.
超音波箱体后端降温风扇应正常运转，振动子两端风扇应正常运转。 - Because of high temperature reduction is the traditional synthesis method, and the characteristics of the materials were impacted by synthetic temperature, calcining time, the content of carbon additives, impurities.
因采用的是高温还原传统的合成方法，材料的特性受到合成温度，煅烧时间，碳添加剂的含量，杂质等因素的影响。 - The constant volumetric delivery and melt temperature reduction bring a significant improvement in the quality of the end product.
稳定的体积流量和降低熔体温度对于改善最终产品的质量有重要意义。